Rajlaxmi Machine Tools
Near Sunrise Bag, Gondal Road, Rajkot, Gujarat
GST No. 24AANFM2459C1ZE
TrustSEAL Verified
Call 08048739660
85% Response Rate
SEND EMAIL
Product Details:
| Model Name/Number | ARC 200T |
| Phase | Single Phase |
| Rated Input Current | 200 A |
| Brand | HMP |
| Frequency | 50 Hz |
| Voltage | 230 V |
| Country of Origin | Made in India |
Product Details:
| Model Name/Number | ARC-200L |
| Phase | Single Phase |
| Brand | HMP |
| Frequency | 50 Hz |
| Voltage | 230 V |
| Duty Cycle | 60% |
| Country of Origin | Made in India |
Product Details:
| Model Name/Number | ARC200 |
| Phase | Single Phase |
| Rated Input Current | 200 A |
| Brand | HMP |
| Frequency | 50 Hz |
| Voltage | 240 V |
| Color | Black,Blue |
Product Details:
| Model Name/Number | ARC200S |
| Phase | Single Phase |
| Brand | HMP |
| Output Current Range | 150 A |
| Frequency | 50 Hz |
| Voltage | 230 V |
| Country of Origin | Made in India |
| Color | Yellow |
Product Details:
| Phase | Single Phase |
| Rated Input Current | 70 A |
| Brand | HMP |
| Frequency | 50 Hz |
| Country of Origin | Made in India |
| Model Number | ARC-250 |
| Rated Input Power (KVA) | 9 KVA |
| Efficiency (%) | 85% |
Product Details:
| Model Name/Number | ARC300G |
| Phase | Single Phase |
| Brand | HMP |
| Frequency | 50 Hz |
| Duty Cycle | 60% |
| Efficiency (%) | 85% |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model Name/Number | ARC400G |
| Phase | Single Phase |
| Brand | HMP |
| Output Current Range | 80 A |
| Frequency | 50 Hz |
| Voltage | 240 V |
| Duty Cycle | 60% |
| Surface Treatment | Color Coated |
| Country of Origin | Made in India |
Product Details:
| Model Name/Number | TIG 250 A |
| Welding Type | TIG Welding |
| Phase | Single Phase |
| Voltage | 230 V |
| Brand | HMP |
| Frequency | 50 Hz |
Product Details:
| Brand | Rajdeep |
| Model | MIG-250F |
| Welding Current Range | 25-250A |
| Phase | Single Phase |
| Working Voltage | 415V |
| Power Factor | 0.93 |
| Efficiency | 0.85 |
| Product Type | New |
The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.
The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds
Product Details:
| Brand | Rajdeep |
| Model | MIG-250F |
| Welding Current Range | 25-250A |
| Phase | Single Phase |
| Working Voltage | 415 +- 15% V |
| Cooling | Forced Air |
| Power Factor | 0.93 |
| Efficiency | 0.85 |
| Technology | IGBT |
| Product Type | New |
The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.
The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds
Product Details:
| Brand | HMP |
| Model | MIG-400 |
| Welding Current Range | 60-400A |
| Phase | Single Phase |
| Working Voltage | 415 +- 15%V |
| Power Factor | 0.93 |
| Efficiency | 0.85 |
| Product Type | New |
The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.
The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds
Product Details:
| Material | Circuit |
| Model Name/Number | Arc 200A |
| Usage/Application | Industrial |
| Phase | Single Phase |
| Automation Grade | Manual |
| Rated Input Current | 200A |
| Brand | Ramato |
| Frequency | 50Hz |
| Voltage | 230V |
| Display Type | LED |
| I Deal In | New Only |
| Generator Compatible | No |
Product Details:
| Model Name/Number | TIG 200A |
| Voltage | 240 V |
| Output Current Range | 70 A |
| Brand | HMP |
| Frequency | 50 hz |
Product Details:
| Power Source | Electirc |
| Welding Type | ARC |
| Phase | 1 Phase |
| Model Type | WELDING |
| Automation Grade | Manual |
Product Details:
| Model Name/Number | Any |
| Length | 350 mm |
| Material | Welding Rods |
| Brand | Manglam |
| Size | Any |
| Diameter | Any |
| Welding Current Range | any |
| Type Of Product | Rods |
| Electrode Diameter | Any |
| Electrode Length | Any |
Product Details:
| Brand | Senor |
| Material | Mild Steel |
| Operating Temp | Any |
| Thickness | Any |
| Diameter | Any |
| Length | Any |
| Operating Current | AC, DC |
| Welding Current Range | Any |
| Country of Origin | Made in India |